Portrait: Lithunian Watchmaker Liudas Norkus

The watch group could be a actually great point, as from time to time it appears to embrace new concepts, new ideas, new folks and types with open arms. We’ve seen it occur in watches the place the group can get entangled within the design course of, or with watch golf equipment bringing collectively manufacturers and collectors. And we see it as soon as once more with Liudas Norkus, a brand new identify on the firmament! In simply 24 hours, this younger Lithuanian watchmaker managed to promote out his debut watch. And we’re not speaking about 5, eight, ten and even twenty-five watches, however 2 hundred! Naturally, such tales are likely to get observed by us and it offered an ideal alternative to get acquainted with him and his watch!

Robin, MONOCHROME Watches – Liudas, are you able to briefly introduce your self to our readers?

My identify is Liudas Norkus, and I grew up in a small city in Lithuania with a inhabitants of about 800 folks. There wasn’t a lot to do whereas I used to be rising up, and all of us just about knew one another. I all the time knew that when I completed college, I wished to journey and grow to be unbiased. In 2015, I moved to England, the place I labored full-time till 2021. As my curiosity in watchmaking grew, I began altering jobs extra incessantly, making an attempt to stability work with my ardour, and discovering methods to pay the payments whereas dedicating extra time to doing what I like.

How did get concerned with watchmaking, the place did your ardour come from?

I had just a few classic quartz watches throughout my college years, however I by no means thought watchmaking can be one thing I’d pursue later in life. I first found it in 2019, after I had already moved from Lithuania to the UK. It began after I purchased a watch journal that illustrated a wide range of distinctive watches, which immediately obtained my curiosity. Earlier than that, I solely knew just a few watch manufacturers, however seeing the unbelievable creations by unbiased watchmakers made me surprise how watches had been made and the way they labored.

On the time, I already owned just a few mechanical watches. I nonetheless bear in mind out of curiosity, I ordered a £25 watch restore equipment from Amazon. Utilizing the essential instruments, I opened one of many watches to discover its inside workings, and that was it. I used to be instantly intrigued by the tiny elements inside.

Have you ever studied watchmaking, or did you purchase the talents in numerous method?

I by no means attended any watchmaking college, however since I began in 2019 I’ve been looking for extra info on the Web, how different watchmakers make watches and what methods they use. Over the subsequent few years, I found many watch manufacturers, however I used to be fully alone on this mechanical artistry, and discovering assist at first wasn’t simple.

In 2019 I linked with a buddy and watchmaker, Denis Carignan, from New Hampshire, USA. His 30 years of information in watchmaking and instructing helped me so much to remain on the correct path, and for the subsequent 5 years, we shared and exchanged many concepts.

How did you begin out as a watchmaker, what had been your first steps?

I began with only a few instruments or machines. My first purpose was to grasp the fundamentals of how mechanical watches work. Utilizing varied measuring instruments, corresponding to a depthing device, callipers, and a microscope with a digital digital camera, I precisely measured and studied completely different actions I had bought. I then recreated these actions into the CAD software program, together with a twin open coronary heart motion, Fusee-and-Chain pocket watch actions, and the Seagull ST3600, which I later used for my first watch.

The LN1 Regulator is your very first watch, are you able to clarify to us the place the inspiration comes from?

I accomplished the LN1 Regulator design in 2022, but it surely got here after I created many alternative designs, none of which I used to be in a position to make. Hopefully, I can revisit a few of these ideas I made sooner or later. Since I obtained just a few pocket watches I’ve all the time been drawn to them, notably regulator watches made by nice watchmakers like Ferdinand Berthoud, Breguet, and Patek Philippe. Perhaps their work impressed me to design watches with conventional components.

The design could be very distinctive, and I perceive you do fairly a bit your self. Are you able to inform us extra about its design and development?

One of many first actions I studied was the Seagull ST3600 (21,600vph, 40h energy reserve). Initially, I had doubts about its reliability and longevity, however after seeing it nonetheless working over the subsequent few years, I made a decision to take an opportunity and use it for my first Regulator watch. Selecting this motion additionally allowed me to create a watch at a extra accessible worth level. All the pieces was designed in CAD software program in-house together with motion, case, crystal and the dial. I selected to make use of domed sapphire crystal to accommodate a three-dimensional dial on prime of the motion, and use the chrome steel case for the motion solely, I wished to create a case as skinny as doable, with out sapphire crystal it’s solely 6.2mm. Field crystal additionally maximizes the view of multi-level dial from each angle.

If you happen to take away the highest plate of a pocket watch motion, you’ll see pillars, in my design pillars supporting the chapter ring. There’s a seen barrel too, however I wished to make the mainspring seen inside by way of the open lid. A number of pocket watches I personal are constituted of brass, I preferred the uncooked brass aesthetic from earlier watchmaking, and the dial aspect additionally options Roman numerals.

The watch is 41mm broad, and simply 6.2mm in top. The crystal provides 5mm to that, so in whole it’s 11.2mm which I really feel continues to be cheap. The dial and indications are made out of 38 particular person components, with the hours at 12′, and the minutes within the centre. The barrel is seen at 5′ and it has an openworked prime plate to point out the mainspring inside. All bridges and fingers are 24k gold-plated, and the mainplate is sandblasted and lacquered.

Are you able to elaborate on what is finished in-house, with reference to creating components of ending them?

I modified the motion in-house, making it work along with the dial aspect I designed. I additionally made the highest plate, bridges with pins, pillars, and barrels utilizing a lathe and milling machine. The barrel lid and fingers had been laser-cut within the UK, however all of the seen elements had been fully hand-finished by me, utilizing sandblasting and varied hand instruments. I’m additionally very grateful to watchmaker Jack Matthew Elam, I believe he is among the best watchmakers in England as we speak. Due to him, I discovered many alternative methods in the previous few years that I used to be in a position to apply to my first watch.

Whereas most components will now be made for me, I’ll nonetheless be answerable for making just a few minor elements and hand-finishing each half. It’s an extended course of, with 1000’s of items to complete and assemble by hand, all inside a really brief time frame.

You offered out the primary two batches of 100 items in a short time! How did you handle to do this?

Sure, 200 items had been offered in 24 hours, after the launch inside just a few hours I acquired a whole bunch of messages and in 3 hours first 100 watches had been already gone, I believe I used to be additionally fortunate to fulfill nice collectors who helped me to take allocations and everybody within the group shared the watch with others. It was an enormous shock however I’m very joyful about it clearly! I set the worth at GBP 900 for the primary batch of 100 items, and GBP 1,100 for the second.

I do know it may be a bit early to inform since you could have 200 watches to make, however; what’s subsequent?

I wish to discover completely different concepts, as I’m nonetheless initially of my journey and there’s a lot extra to find. For me, it’s essential to constantly enhance the standard of each watch I create and have the ability to do extra in-house work, particularly with a brand new motion. That is what I intention to do for the LN2. It has additionally labored out that my second watch may be made in america, which provides one other thrilling chapter to this journey.

The place do you see your self heading within the subsequent couple of years? What can we count on from you?

I’m actually excited concerning the journey forward, each day I study slightly bit extra, and I wish to spend extra time finding out horology, have the ability to make extra elements on my own and discover new concepts to convey collectively in a watch.

You presently stay in London, England however are initially from Lithuania if I’m appropriate. How has that transfer formed your view on watchmaking?

I’ve acquired quite a lot of assist from Lithuanian watch lovers and collectors. I’m hopeful that in the future, we’ll have extra new watchmakers rising from Lithuania.

How can folks get in contact with you or keep updated in your work and progress?

My web site might be open very quickly however for now, everyone seems to be welcome to achieve me on Instagram, Fb or LinkedIn.