Aluminum Watch Stand for Multiple Brand smartwatches, Compatible with Michael Kors, Fossil Gen 6 Hybird/Gen 6/Gen 5/Gen 5e/Gen 4, Armani, Diesel – Stand only
Price: $9.99
(as of Feb 05, 2025 02:02:03 UTC – Details)
Tranesca Watch Stand for Multiple Brand Smart Watches-
Guarantee from Seller
High Standard :
We guarantee that every piece of our Tranesca watch stand is made of top quality materials including fortified TPU holder made from top quality German TPU and top quality aluminum with gloss finishing
Safety Ensured:
All of our watch stand will go through functionality testing before they are sent to you.
Precise Cutting: We ensure the precise matching of watch charger to the watch stand and you will never need to worry about your watch getting disconnected.
Simple and Elegant :
We have re-designed the cable management hold to ensure a convenient and sturdy way to manage smartwatch charging cable
Compatible model: Compatible with smartwatches of Michael Kors, Diesel, Fossil, Armani and more
Frequently asked questions:
Q: How can I put my charger on the stand ?
A: Please read the instructions in the package or refer to the installation procedure on the Amazon website. 3 simple steps, and it is as easy as a pie.
PLEASE NOTE : Smart Watch and Smart Watch chargers are NOT INCLUDED, this is only an universal smartwatch charger holder/stand for smartwatches of multiple brands (Including Smart Watches of Michael Kors, Diesel, Fossil, Armani and more)
Perfect solution as a bedside watch stand for your multiple brand watches. Put your watch charger into the stand, hang your watch on the stand and the charging would start automatically (You don’t even need to buckle the watch band). With the ergonomically designed 45-degree angle, you can directly see the time or tap on your watches and no longer need to twist and turn your head to find out what the time is.
Compatible with watch chargers of multiple brands, because Michael Kors, Armani, Diesel, Fossil use the watch chargers of the SAME DIMENSION because they get the charger solution from the same company ( A company based in Santa Barbara). Therefore, our watch stand is able to hold the watch charger of various brands AS LONG AS THE WATCH CHARGER IS THE ORIGINAL ONE ( The one that comes with your smartwatch)
Keeps your desk neat and clean, you no longer needs to worry about your watch getting disconnected during the night leaving you a watch dead as a doornail in the morning. Nor you will need to worry about unable to find your Watch and charger on a messy desk, because it is right there on the stand.
12 month hassle free return policy from Tranesca
Customers say
Customers appreciate the charging adapter’s functionality, build quality, and value for money. They find it works well with their watches and has a sturdy design made of aluminum. The stand looks nice and doesn’t take up much space. Many customers say it fits their watches perfectly.
AI-generated from the text of customer reviews
13 reviews for Aluminum Watch Stand for Multiple Brand smartwatches, Compatible with Michael Kors, Fossil Gen 6 Hybird/Gen 6/Gen 5/Gen 5e/Gen 4, Armani, Diesel – Stand only
Add a review
$9.99
Ron –
Looks good, works perfectly!
As advertised. I rarely offer 5 star reviews, but can’t find a thing wrong with charger. Stands sturdily on my night stand, does not fall off, certainly not when I hang my watch on it either. I’ve been asked by a friend, ‘where’d you find that?’ Directed to Amazon. It’s a nice design, sturdy as possible needed, and watch drapes easily over the charging pod (most any will fit), without fussing to find the correct fit. Great price, and highly recommended!
Jason reuter –
Will not work with the Google Pixel watch without some modification.
I knew when i bought this it would not work with my watch, but i loved the design for my desk at home.I clamped it to a block of wood that i had put into my vice and then took a 1&1/4 inch drill bit and from the top going slow be sure to center i started drilling about half way through. As you can see the metal started to show on the top. Charger bas snapped right into place and works great!I would buy another for sure, if i was to get another charger base for the watch.
Ronald L. Russell –
Nicely made stand with contemporary styling
I purchased this as a stand for my Garmin Instinct Solar. I like the simple and clean styling. It’s made of fairly thick and sturdy aluminum, formed into a stand with smooth curves flowing from the base to the upright portion and again to the watch holder portion.The watch holder portion has a molded plastic cushion with a hole and passageway for the charging cable, with a separate molded cable guide on the upright part of the stand. The hole in the watch holder portion looks as if it’s made to accommodate a round magnetic charger. My Garmin has an actual charging port oriented the wrong way for this to work very well, which would require me to move the watch so that it isn’t centered over the cushion.However, just because the stand isn’t designed for a Garmin doesn’t mean it won’t work for me. I don’t plan on using the stand for the charging cable, my intent is to place the watch on the stand in a window, and let the solar feature charge the watch. And for this, it works just fine.The stand sits on the window sill, the Garmin rests on the stand, facing out of the window, and the Sun shines on it, keeping it topped up until I’m ready to wear it. And it looks nice.
dali –
Works well for Gen 5 Carlyle
I bought another watch stand before this one that had a built in charger and I had a lot of problems getting it to charge.I never had a problem with the OE cable, so I decided to go back to it and try to find a stand that was compatible with it.This stand works with my OE cable for my Gen 5 Carlyle.It holds the cable and charger part fine, but it isn’t as clean as the built in charger stands since the wire runs along the back and on top of the base. The stand is stable when the watch is on it, but you have to be careful when installing or removing the watch since the bottom isn’t that heavy and it has a higher center of gravity. I have not had it fall over. The charging part has not pulled out yet and the watch stays on well. The finish on the edges are a little rougher than I would like, but not sharp enough to cut you. Also the rubber part doesn’t quite align with the top so it overhangs slightly on the edge, but it’s barely noticable.Overall much happier with this since it uses the original cable which just works.
brad johnson –
Will hold a 26mm charger. Very stable. Looks great!
I bought my Fossil Gen 5 watch used. I wasn’t sure if the charger that came with my watch was the OEM charger or if it was an aftermarket charger so I was a little hesitant on this purchase. People had asked exactly how big the hole in the stand was but the only answer was “it will fit an original charger”. The hole in the stand I received is approximately 26mm +/- .5mm . The black plastic material is rather soft (not quite as soft as rubber) so it will stretch a little bit and it holds your charger nice and tight. I bought an aftermarket charger ( MoKo Charger Compatible with Fossil Gen 4/Gen 5/Emporio Armani/Skagen falster 2/Misfit Vapor 2 ) because I wanted to have the watch stand for my nightstand and still have a charger that I could take with me and it fits perfectly.The stand is very stable and the angle is just right making it easy to read the watch face while its charging.Great little inexpensive stand!
Honest Al –
Perfect Watch Stand Charger
This is the perfect watch stand charger for my Michael Kor smart watches. The stand takes up little space, it holds the watch while charging and the charger fits perfectly into the watch stand. I purchased 2 of them because the price was really reasonable. I love the fact how I can store the watch under the stand when I’m not charging them which make it even more convenient. The magnetic strength is great and it works very well. I will highly recommend purchasing it if you have this type of smart watch.
lawrenrg –
Great Charger Holder/Stand
This is a very nicely designed and constructed charger holder/stand. The OEM charger cable fits perfectly into the rubber mount opening of the stand. A very simple idea that works great. It is also well balanced so once you hang your watch on it it won’t tip over. Congrats on a great product at a reasonable price. I will be coming back for another.
Bellea –
Don’t Hesitate to Purchase
I’m so happy with my purchase. I have numerous watches and charging them is a pain because I’ll wake up to the watch not being charged because it was not precisely attached to the charging base. Therefore, I am horrible about keeping up with the frustrating charging experiences and rarely get to wear any of my smartwatches. I decided to buy this product to see if it makes charging less cumbersome. Wow, it makes it so easy to charge my watches now! My charger fit in this stand perfectly and the aesthetics of it looks very nice on my nightstand. Now, I just take my watch off and lay it on the charger, catches perfectly and never off centers from the base ensuring that my watch is fully charged when I wake up in the morning. I’m thinking about purchasing one for each of my smartwatches (5 total) because they look great as a watch display as well. The stand looks that nice! Quality is great and the seller stands behind the product, offering a 12 month product replacement policy outside of Amazon’s 30 day return policy. This is one of my better purchases. Very happy and highly recommend!!
EDELMIRA TIJERINA RAMOS –
No sirvió para mi teléfono
Paul –
Works with the Fossil 6 and its stock charger.Follow the directions to attach the charger and do not force it. The charger will pass through smoothly if you do it right then click into place.Stand is stable with its aluminum build and four silicone feet. It has some weight to it and does not easily fall over. Black part is made of plastic.Cord is hidden well with the organizer loops and paths.Overall, I would definitely recommend this and I really enjoy it. It took a long time to find a good stand for the new gen 6 that lets you use the faster charging stock charger that comes with the watch.
Amazon Kunde –
Sehr schöne Halterung für die Ladung der Smartwatch. Hält meine Fossil sicher am Platz und sieht auch noch gut aus.
Saichen –
KEE BOON CHUAN –
Works well and looks good.